- Product Description
- Technical Specification
- Product Reviews
JL Audio 12WXv2-4 - 12" 4 Ohm Subwoofer
The 12WXv2 is an ideal subwoofer driver for lower power applications. It features excellent suspension linearity and a DMA-optimized motor system to keep distortion low. Our patented Elevated Frame Cooling design is also on-board for enhanced power handling and reliability. The 10WXv2 is best used with amplifier power in the 75W - 200W range and is optimized to operate in a compact 1.375 cu. ft. (38.94 l) sealed enclosure, or a 1.75 cu. ft. (39.6 l) ported enclosure.
Dynamic Motor Analysis - DMA Optimized Motor
JL Audio's proprietary Dynamic Motor Analysis system is a powerful suite of FEA-based modeling systems, first developed by JL Audio in 1997 and refined over the years to scientifically address the issue of speaker motor linearity. This leads to vastly reduced distortion and faithfully reproduced transients... or put simply: tight, clean, articulate bass.
Elevated Frame Cooling
JL Audio's patented Elevated Frame Cooling design delivers cool air through slots directly above the top-plate to the voice coil of the speaker. This not only enhances power handling, but also sound quality by minimizing dynamic parameter shifts and power compression.
| Manufacturer | JL Audio |
| SKU | 12WXv2-4 |
| Subwoofer Size | 12" |
| Impedance (Ohms) | 4 Ohms |
| RMS Power Output (Watts) | 200W RMS |
| Peak Power Output (Watts) | No |
| Voice Coils | N/A |
| Sensitivity (dB) | 87.17 dB |
| Frequency (Hz) | No |
| Woofer Composition | No |
| Woofer Surround | No |
| Free-Air | Yes |
| VAS (Liters) | 94.49 L |
| Fs (Hz) | 27.43 Hz |
| Qts | 0.562 |
| XMAX | 10 mm |
| Top Mount Depth | No |
| Bottom Mount Depth | 135 mm |
| Cutout Dimensions | 281 mm |
| Sealed Box Volume (Cu. Ft.) | No |
| Ported Box Volume (Cu. Ft.) | No |
| Port Diameter | No |
| Port Length | No |
Write Your Own Review
You're reviewing: JL Audio 12WXv2-4
