- Product Description
- Technical Specification
- Product Reviews
Rockford Fosgate P2D2-10 - 10" 2-Ohm Subwoofer
Rockford Fosgate has always been known as The PUNCH and the P2 10-inch subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.
Anodized Aluminum Voice Coil Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100 at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
CEA-2031
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.
Flex Fit Basket
The Flex Fit frame utilizes slots (where feasible) instead of single screw sized holes. This allows slight adjustment of the speaker when mounted.
VAST Surround (Vertical Attach Surround Technique)
VAST significantly increases a speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.
Stitched Tinsel Leads
Improved reliability and performance by reducing fatigue and possible shorting. Multipoint periodic stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer. These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.
Additional Features
- Kevlar Fiber Reinforced Paper Cone
- Protective PVC Textured Magnet Cover
- Custom 10-AWG Nickel Plated Push Terminals
- Extended Pole Piece and Bumped Vented Backplate
- Dual Linear Spider with Embedded 16 AWG Tinsel Leads
- Diamond Cut Cast Aluminum Trim Ring with Optional Grille
- High-Temp Voice Coil With spun-Laced Nomex Re-Inforcement Collar
- StampCast Basket with Integrated Spider Venting
| Manufacturer | Rockford Fosgate |
| SKU | P2D2-10 |
| Subwoofer Size | 10" |
| Impedance (Ohms) | 2 Ohms |
| RMS Power Output (Watts) | 300W |
| Peak Power Output (Watts) | 600W |
| Voice Coils | Dual |
| Sensitivity (dB) | 84dB |
| Frequency (Hz) | No |
| Woofer Composition | Kevlar-Fiber Paper |
| Woofer Surround | No |
| Free-Air | No |
| VAS (Liters) | 35.4 Liters |
| Fs (Hz) | 29Hz |
| Qts | 0.5 |
| XMAX | 11mm |
| Top Mount Depth | No |
| Bottom Mount Depth | 5.92" |
| Cutout Dimensions | 9.13" |
| Sealed Box Volume (Cu. Ft.) | No |
| Ported Box Volume (Cu. Ft.) | No |
| Port Diameter | No |
| Port Length | No |
Write Your Own Review
You're reviewing: Rockford Fosgate P2D2-10
