- Product Description
- Technical Specification
- Product Reviews
Rockford Fosgate T0D215 - 15" 2-Ohm Subwoofer
The T0D215 15" 2-ohm Dual Voice Coil subwoofer mimics the performance and design from its older Power Series brothers. The T0 subwoofers feature VAST technology that increases surface cone area up to 25% so it performs like a much larger woofer. The FlexFit basket not only looks the part but it provides extreme flexibility for extreme installations. Clean, high tech, and high power handling characteristics let this subwoofer wear the torture-tested "Power Series" badge!
Anodized Aluminum Voice Coil Former
Rockford Fosgate subwoofers use anodized aluminum voice coil formers that provide superior heat dissipation (up to 100° at full power levels). Unlike traditional plastic substitutions, aluminum acts like a heat-sink to quickly dissipate thermal build-up on the voice coil. This keeps subwoofers cool during high SPL conditions.
Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous damand, not instantaneous power handling, that over time, can damage voice coils.
Allows nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. Also provides built-in fusing for protection from voltage transients. Removing and inverting the center plug, a Series or Parallel wiring configuration is accomplished. The removable impedance selection jumper also provides fused protection in severe overload conditions.
Stitched Tinsel Leads
Multipoint "periodic" stitched lead wire technique reduces the mass of each tinsel lead and spreads stress and strain over a greater area, significantly improving the reliability and performance of the subwoofer. These stitched tinsel leads withstand extreme duty cycles, fatigue and high current that is critical to robust design.
IDHS Inductive Damping Heat Sink
Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature.
The Vertical Attach Surround Technique significantly increases a speaker's effective radiating cone area without complicated installation issues. The result provides up to 25% more effective radiating cone area for the same model speaker. VAST significantly increases a speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.
- Anodized aluminum heat sinking dust cap
- Anodized aluminum voice coil former / copper clad aluminum wire
- High-temp voice coil with spun-laced Nomex® re-inforcement collar
- Kevlar fiber reinforced paper cone
- Optimized and matched magnetic and complicance geometry
- Optimized pole piece and spider venting
- Periodic-stitched fatigue resistant tinsel lead wire
- Proprietary 8 AWG insulated allmetal input spring terminal connection
- Rigid die-cast aluminum basket
|RMS Power Output (Watts)||800W|
|Peak Power Output (Watts)||1600W|
|Top Mount Depth||No|
|Bottom Mount Depth||No|
|Sealed Box Volume (Cu. Ft.)||No|
|Ported Box Volume (Cu. Ft.)||No|